How to remove disk mirror in Windows 10 without losing data?
1. Open Disk Management by typing “diskmgmt.msc” into the Run dialog box or in the Cortana search box. 2. Select the drive you want to break the mirror from. Right-click on the drive and select “Break Mirrored Volume.” 3. Confirm the break mirror operation. 4. Once the break mirror operation is complete you will have two un-mirrored drives. 5. Right-click on the drive you no longer want and select “Delete Volume.” 6. Confirm the deletion operation. 7. The deleted drive will show unallocated space. You can now use this space on the drive or create a new partition.
Date:2023-01-09
How do I repair a disk in Windows 10?
1. Open File Explorer. 2. Right-click on the disk that needs repair and select Properties. 3. Go to the Tools tab in the dialog that appears. 4. Select Check from the list of options. 5. Wait for the scan to finish. 6. Once the scan is complete, choose Repair from the list and follow the prompts to fix any errors found. 7. Wait for the repair process to finish. 8. Once complete, restart your computer and the disk should now be repaired.
Date:2023-01-09
How do I Turn Off the navigation pane in Windows 10?
To turn off the navigation pane on Windows 10, open File Explorer, click on the View tab on the ribbon, and uncheck the option labeled "Navigation Pane".
Date:2023-01-09
How do I change the network system icon in Windows 10?
1. Right-click the network icon in the Taskbar and select "Open Network & Internet Settings". 2. Click "Change adapter options" in the left panel. 3. Right-click on the currently-active network adapter, then select "Properties". 4. In the Adapter’s Properties window, click on the "Configure" button. 5. Click on the "General" tab and select the "Change Icon" button. 6. Choose any of the available icons, or navigate to the directory in which you’ve stored your own icon. Click "OK" and close all windows. The new icon should now be visible in the system tray.
Date:2023-01-09
How do I install iTunes on Windows 10?
1. Download the latest version of iTunes from the Apple website. [https://www.apple.com/itunes/download/] 2. Run the installer. 3. Follow the prompts to complete the installation. 4. Once installed, you can launch iTunes from the Start menu.
Date:2023-01-09
Where are Windows 10 drivers located?
Windows 10 drivers are typically located in the C:\Windows\System32\drivers folder. Additionally, individual driver files may be located in the folder Windows\System32\DriverStore\FileRepository.
Date:2023-01-09
How do I change the default boot image in Windows 10?
1. Press the Windows Key + R to open the Run dialog. 2. In the Run dialog, type "control sysdm.cpl" and press Enter. 3. When the System Properties window opens, click on the "Advanced" tab. 4. Click on the "Settings" button, located under the "Startup and Recovery" section. 5. Under "System startup" you’ll find the current default boot image. 6. Click on the "Browse" button, located to the right of the default boot image. 7. Use the explorer window to locate the new default boot image you want to use. 8. Once you’ve selected the new boot image, click OK. 9. Click Apply, then OK to save the changes. 10. Restart your computer to see the new boot image.
Date:2023-01-09
What happened to SMBv1 in Windows 10?
Microsoft removed Server Message Block (SMB) version 1 in Windows 10 as of the 1709 version. This was due to the potential security risks associated with SMBv1, such as the WannaCry ransomware attack which exploited a vulnerability in SMBv1. Microsoft recommends disabling SMBv1 and using SMBv2 or later versions when possible.
Date:2023-01-09
How do I configure DNS settings in Windows 10?
1. Click the Start menu, then type "Network Connections" and press Enter. 2. Right-click on the network connection that you would like to configure, then select "Properties". 3. In the Properties window, click on the "Networking" tab. 4. Select "Internet Protocol Version 4 (TCP/IPv4)" from the list of connection items, then click the "Properties" button. 5. Under the General tab, change the "Obtain DNS server address automatically" option to "Use the following DNS server addresses". 6. Enter the preferred DNS server address and the alternative DNS server address provided by your network administrator or service provider. 7. When finished, click the "OK" button to apply the changes.
Date:2023-01-09
Is tweak bit safe for Windows 10?
Yes, TweakBit is a safe and reliable program for Windows 10 computers. It is a legitimate software that has been tested and approved by Microsoft, and it has been used by millions of satisfied customers.
Date:2023-01-09

Recommend

Change
How to sideload Microsoft Edge extensions on Windows 10?
1. Make sure you are running the latest version of Microsoft Edge. 2. Download the extension (.crx or .zip file) from a trusted source and save it to your computer. 3. In Microsoft Edge, click the More icon (three horizontal dots) from the top-right corner. 4. Select Extensions from the menu. 5. On the Extensions page, turn on the toggle switch next to Developer mode. 6. Click the Load extension button. 7. Select the downloaded file and approve any security warnings. The extension should now be installed and listed in the Extensions page in Microsoft Edge.
How to fix 144 Hz in Windows 10?
1. Right-click on your desktop, select Display Settings. 2. Select the Advanced Display Settings option. 3. Select Display Adapter Properties. 4. Select the Monitor tab. 5. Select the Screen Refresh Rate dropdown and select 144 Hz. 6. Click Apply and then OK. 7. Restart your computer.
How to uninstall brushes on Windows 10?
1. Open the Start menu, then type "Control Panel" and press Enter. 2. Under the Programs heading, select "Uninstall a program" or "Programs and Features". 3. In the list of programs, find the brush and select it, then click "Uninstall" or "Uninstall/Change" at the top of the list. 4. Follow the prompt to uninstall the brush from your computer.
How do I install widgets on Windows 10?
Widgets are not available on Windows 10. Windows 10 replaced the previous sidebar feature from Windows 7. The closest equivalent on Windows 10 is the Live Tile feature, which you access by clicking the Start button and searching for the app you want to install.
How do I test if Windows 10 knows where I am?
You can use the Windows Maps app to test if Windows 10 knows where you are. Open the Maps app, then zoom out and look for a blue dot that identifies your location. If the blue dot is present, then Windows 10 has successfully identified your location.
How to fix Google Chrome not responding on Windows 10?
1. Check for updates: Check for updates for Google Chrome, Windows, and any installed antivirus software. 2. Advanced Settings: Check the status of Chrome’s advanced settings like hardware acceleration and network prediction. If hardware acceleration is enabled, disable it from Chrome’s settings and see if it resolves the issue. 3. Reinstall Chrome: If none of the above options work, then try reinstalling Chrome. To do this, go to the Control Panel and uninstall Chrome from there. Then download the latest version from here and reinstall it. 4. Restart Windows: Restarting Windows can also be a possible solution to this problem. Restarting your computer can clear any corrupted files that may have been causing problems. 5. Malware Scan: Run a scan with a powerful anti-malware software. Malware and viruses can often cause crashes and freezes in Chrome. 6. Reset Chrome: Reset your Chrome by going to Menu > Settings > Advanced > Reset and then select Reset. This will reset all settings and remove Chrome extensions, which can sometimes cause issues.

Question