1. Purchase a USB hard drive with an available USB port, or an external hard drive. 2. Obtain an official Windows 10 installation media—either Windows 10 installation files or an ISO image—from Microsoft. 3. Connect the USB hard drive to your computer and open the Windows Media Creation Tool. 4. Create a bootable USB drive for the Windows 10 media. 5. Once the USB drive has been created, reboot your computer and select the USB hard drive from the boot menu. 6. Follow the instructions on the screen to install Windows 10 onto the USB hard drive. 7. Once Windows 10 has been installed, you can use the USB hard drive to access your Windows 10 computer anywhere.

No, you cannot write UWP console apps on Windows 10. UWP applications are designed for Windows Store, so they will not run in a console environment.

VNC (Virtual Network Computing) is a remote access software tool for Windows 10 that allows users to connect to and control a computer from a remote location, using the Remote Desktop Protocol. VNC allows for a secure connection between two computers over the Internet, enabling users to control and access a remote computer from their own device. It supports multiple platforms, including Windows and Mac.

1. Right-click on Windows Start button and click on Settings. 2. Select Apps > Apps & features. 3. Select the app you want to uninstall, and then select Uninstall. 4. Follow the instructions to complete the uninstallation process.

1. Download CentOS 7 ISO and create a Bootable USB Drive: You will need to download the ISO file of CentOS 7 from its official website. After that, use the Rufus tool to create a bootable USB drive of CentOS. 2. Back up your Data: Before you start the installation process, it’s important that you back up all your data to a secure location in case anything goes wrong during the installation. 3. Shrink the Windows 10 Volume: Now you need to free up enough disk space for CentOS 7. To do this, launch the Disk Management utility in Windows 10 (press Windows key + X and select Disk Management) and shrink the Windows 10 partition to create unallocated space. 4. Boot from USB and Begin CentOS 7 Installation: Now plug in the bootable USB drive and boot your computer using it. From the boot menu, select “Install CentOS Linux” and press the Enter key. The installation program will start automatically. 5. Configure the CentOS 7 Installation: In the installation program, select the language and click “Continue”. On the next screen, click “Install CentOS Linux 7”. On the next screen, select “I will install the operating system later” and click “Continue”. On the next screen, select “Manual” and click “Continue”. 6. Select Unallocated Space and Create a Partition for CentOS 7: Now from the partition management window, select the unallocated space that you had created earlier and click the “Create” link to create a partition for CentOS 7. 7. Configuration of Boot Loader: On the next screen, select the correct disk where CentOS 7 is being installed and click “Continue”. On the next screen, select the “Standard Boot Loader” option and click “Continue”. 8. Configure network and Date/Time Settings: Now configure the network settings for CentOS 7 and set the correct date and time. 9. Completion of Installation: After the installation is finished, remove the USB drive and restart your computer. You will now be able to boot into either Windows 10 or CentOS 7.

1. Make sure that the touchpad is not disabled: From the Windows Start menu, search for “Control Panel” and open it. Click on “Hardware and Sound.” Under Devices and Printers, click on “Device Manager.” In Device Manager, expand the “Mice and other pointing devices” option. Right-click on your Dell touchpad device and click on “Enable” if the option is available. 2. Update your Dell touchpad driver: From the Windows Start menu, search for “Device Manager” and open it. In Device Manager, expand the “Mice and other pointing devices” option. Right-click on your Dell touchpad device and click on “Update driver.” Select the option to “Search automatically for updated driver software.” 3. Repeat the steps mentioned in 1 & 2 by disabling and re-enabling, and then updating the driver for any other Human Interface Devices (HID) that are present. 4. Make sure Touchpad sensitivity is enabled: Go to Control Panel > Hardware and Sound > Mouse. Under “Device settings,” make sure that Touchpad sensitivity is enabled. 5. Perform a System Restore: If all else fails, you can try performing a System Restore to a previous point when the touchpad was working. To do this, go to Control Panel > System and Security > System > System Protection and choose a Restore Point from the available options.

Yes, McAfee Antivirus is a good choice for Windows 10. It provides a comprehensive and easy-to-use security solution that protects against a range of malware, including viruses, ransomware, spyware and more. It also includes extra features that help to protect against phishing and online fraud, as well as browser protection and enhanced firewall.

1. Check The Recycle Bin: The first thing you should try to do is to check the Recycle Bin. When you delete an item, Windows stores it in the Recycle Bin folder. If you were browsing photos in a folder, open the Recycle Bin and look for the deleted photo file. 2. Restore Previous Version: If you have the version history feature enabled for your folder, you can easily restore a previous version. Right-click on the folder where you lost the photos, select Restore Previous Versions from the context menu. Select the version of the folder which had the photo. 3. Use File Recovery Software: File recovery software is an effective way to recover deleted photos. There are several data recovery software available for Windows. Download one such software and run it to scan for deleted photos. Most of the software will show you the preview of the found photos. If you find the photo you’re looking for, you can recover it.

1. Insert the Windows 7 install disc. 2. Boot from the disc, and when prompted, press any key to boot from CD or DVD. 3. Select your language settings, and then click “Next”. 4. Click “Repair your computer”. 5. Select “Command Prompt”. 6. Type "bootrec /fixmbr" and press Enter. 7. Type “bootrec /fixboot” and press Enter. 8. Type “bootrec /scanos” and press Enter. 9. Type “bootrec /rebuildbcd” and press Enter. 10. Type “exit” and press “Enter” to restart the computer and complete the process.

1. Open the Start menu. 2. Go to Settings and click System. 3. In the left menu, click Notifications & actions. 4. Under Notifications settings, adjust the settings for what you’d like to receive notifications for. 5. Turn off the “Show App Notifications” toggle switch to disable all notifications. 6. Alternatively, you can uncheck the boxes next to the apps that you don’t want receive notifications from. 7. To complete, press the back arrow in the top left-hand corner of the window.